Bilstein by Mudster shock absorbers for a +3.5 cm suspension lift on Dacia Duster 3 / Bigster 4x4. The kit is intended to work with the original springs and does not require additional correction parts.
- Compatibility: Dacia / Renault Duster 3 / Bigster 4x4 (2024->).
- Role: Shock absorbers (lift kit) that increase ground clearance by +3.5 cm compared to the standard Duster suspension.
- Material: Not specified.
- Delivery: Rubber dust protective sleeves are included in the package.
- Useful for: A suspension lift while keeping the original springs; no need for additional parts (camber correction, engine/gearbox spacers, etc.).
- Off-road usefulness: Increased ground clearance (+3.5 cm) can help reduce underbody contact on uneven terrain.
- On-road usefulness: Designed to provide stable road behavior for Duster 3 / Bigster 4x4 with the original springs.
Recommendations for use and maintenance
1. Periodically check the condition of the shock absorber rubber dust protective sleeves (we recommend checking at each periodic maintenance operation such as oil and filter changes). If they show cracks, cuts, or gaps between the sleeve and the shock absorber, replace them as soon as possible. If they are not in good condition (cracks, breaks, missing pieces, etc.), there is a major risk of shock absorber damage; this type of defect is not covered by warranty.
2. Periodically check tire pressure. Recommended range: 1.8 to 2 (1.8 for comfort, 2 for highway conditions).
3. Adjust wheel geometry (especially convergence angles) after 500–1000 km from suspension installation.
Warranty & documentation
To benefit from warranty, the products must be installed in an authorized workshop. Any warranty claim must be accompanied by proof of purchase (invoice, warranty certificate) and proof of installation in an authorized service (installation invoice and work order/estimate).
For shock absorbers submitted for warranty, the parts will be sent to the manufacturer’s factory for laboratory analysis. This analysis involves opening the shock absorbers; as a result, they cannot be returned in the same condition and are scrapped by the factory.
Homologation / documents
Any available homologation documents are listed in the product’s Attachments section. We do not know the specific legislation of each country; beyond the documents already listed there, we can only provide the manufacturer’s certificate of conformity, issued in our name.
