Reference: MDSCUALU5MM
5mm Aluminum Shield for Engine, Gearbox & Bumper (Dacia Duster)
5 mm aluminum alloy shield for the engine, gearbox, radiator and front bumper on Dacia Duster (2010→2023). Supplied with fastening screws and accessories.
Bilstein by Mudster complete suspension lift kit for Dacia Duster 3 / Bigster 4x4 (2024+), providing a +4 cm increase in ground clearance versus the standard suspension.
Payments
Delivery
Warranty
|
|
370.30 EUR x 24 months |
Bilstein by Mudster complete suspension lift kit designed for Duster 3 / Bigster 4x4, offering a +4 cm increase in ground clearance compared to the standard suspension.
Recommendations for use and maintenance
1. Periodically check the condition of the shock absorber rubber dust protective sleeves (we recommend checking at each periodic maintenance operation such as oil and filter changes). If they show cracks, cuts, or gaps between the sleeve and the shock absorber, replace them as soon as possible. If the sleeves are not in good condition (cracks, breaks, missing pieces, etc.), there is a major risk that the shock absorbers may be damaged; this type of defect is not covered by warranty.
The shock absorbers rubber dust protective sleeves are included in the package.
2. Periodically check tire pressure. Recommended pressure: 1.8 to 2 (1.8 for comfort, 2 for highway conditions).
3. Adjust wheel geometry (especially toe/convergence angles) after 500–1000 km from suspension installation.
Warranty and documentation
To benefit from warranty, the products must be installed in an authorized workshop. Warranty claims must be accompanied by proof of purchase (invoice, warranty certificate) and proof of installation in an authorized service (installation invoice and work order/estimate).
For shock absorbers covered by a warranty claim, the units will be sent to the manufacturer’s factory for laboratory analysis. This analysis involves opening the shock absorbers; therefore, they cannot be returned in the same condition and are scrapped by the factory.
Homologation / approvals
Any available homologation documents are listed in the product’s “Attachments” section. We do not know the specific legislation of each country; beyond the documents already listed there, we can only provide the manufacturer’s certificate of conformity, issued in our name.
Reference: MDSCUALU5MM
5 mm aluminum alloy shield for the engine, gearbox, radiator and front bumper on Dacia Duster (2010→2023). Supplied with fastening screws and accessories.
Reference: MD140000113
Brand: Mudster
Quaife ATB (Automatic Torque Biasing) differential for the Dacia/Renault Duster rear axle, 4x4, all generations.
Reference: MDBILMUDSOLONF
Brand: Bilstein
Front lift shock absorber providing +35 mm with OEM springs. Compatible with Dacia/Renault Duster 4x4 (2010+). Not compatible with any lift springs.
Reference: MDBARD3
Brand: Mudster
Aluminum wingbar roof bars compatible with Dacia Duster 3 (2024+) and Bigster (2024+), designed for mounting on the vehicle’s longitudinal roof rails.
Reference: MDSNORKEL18
Brand: Mudster
Mudster snorkel for Dacia Duster (2018+). Available unpainted (ready to paint) or painted in the selected color.
Reference: Muster2Go2020
Dacia Duster 1.5 dCi 4x4 (2020), 90,000 km, Mudster edition, with modifications listed below (value stated by seller: 5,000 EUR).
Reference: MDSCUT07D3
Brand: Mudster
6mm aluminum alloy shield for the engine, gearbox, radiator and front bumper on Dacia Duster 3 4x4. Supplied with fastening screws and accessories.
Reference: MDYOKOHAMA215
Brand: YOKOHAMA
YOKOHAMA GEOLANDAR A/T G015 tyre, size 215/70R16, load index 100, speed rating H.
Reference: MDBILMUD35KIT
Brand: Mudster
Complete suspension lift kit for Dacia/Renault Duster 4x4 (2010–2023), providing +35 mm lift.
Reference: MDBILMUD
Brand: Mudster
Lift shock absorbers set (4 pcs) for Dacia Duster 4x4 (2010–2023). Provides suspension lift depending on the springs used.
Reference: MDALCTRFTD3
Brand: Mudster
Aluminum alloy shields pack for the mid-section and fuel tank area on Duster 3 (2024+) and Bigster. Designed to help protect fuel lines, hybrid battery power lines, and the fuel tank.
Reference: MDACISR
Brand: Mudster
Installation accessories for fitting a spare wheel carrier without a towing hook.
Reference: MDSCUT07
Brand: Mudster
6 mm aluminum alloy shield designed to protect the engine, gearbox, radiator and front bumper on Dacia Duster (2010–2023). A practical addition for off-road use.
Reference: MDSCTSIR
Brand: Mudster
Aluminum alloy shield for the fuel tank and exhaust drum on Dacia Duster (2010–2023). Supplied with fastening screws and mounting accessories.
Reference: MD289352
Brand: H&R
Set of 4 H&R springs for Dacia/Renault Duster 2WD, providing a 3 cm suspension lift.
Reference: MDSRDRM
Brand: Mudster
Spare wheel carrier produced by Mudster for Dacia Duster. Painted and treated against corrosion. Requires a towing hook for installation.