Bilstein by Mudster rear shock absorber designed to lift the rear of Dacia/Renault Duster 4x4 while keeping the standard OEM springs.
- Compatibility: Dacia/Renault Duster 4x4 (2010+).
- Role: Rear lift shock absorber; provides 35 mm lift when used with standard (OEM) springs.
- Material: Not specified by the manufacturer in the provided information.
- Delivery: Shock absorbers rubber dust protective sleeves are included in the package.
- Useful for: Suspension lift with OEM springs; no camber correction kits required according to the product specification.
- Off-road utility: Double-reinforced tube, reinforced spring support, and relocated sway bar link mount points to help reduce the risk of bending during off-road use.
- On-road utility: Intended to maintain proper geometry after lifting; wheel alignment (especially toe/convergence) is recommended after installation.
Important: This shock absorber model does not require an engine and gearbox lowering kit, but the lowering kit is recommended by the manufacturer for a more pleasant experience after lifting the suspension.
NOTE: This kit is not compatible with lift springs (any lift spring models).
Warranty and installation requirements: To benefit from warranty coverage, the product must be installed in an authorized workshop. Warranty claims must be accompanied by proof of purchase (invoice, warranty certificate) and proof of installation in an authorized service (installation invoice and work order/estimate).
Warranty analysis for shock absorbers: Shock absorbers submitted for warranty are sent to the manufacturing factory for laboratory analysis. This analysis involves opening the shock absorbers; therefore, they cannot be returned in the same condition and are scrapped by the factory.
Available approvals / documents: Any available homologation/approval documents are listed in the product’s “Attachments” section. Because we do not know the specific legislation of each country, beyond the documents already listed there we can only provide the manufacturer’s certificate of conformity, issued in our name.
Please keep in mind the following recommendations for long service life and best operating conditions:
1. Periodically check the condition of the shock absorber rubber dust protective sleeves (we recommend checking at each periodic maintenance operation such as oil and filter changes). If they show cracks, cuts, gaps between the sleeve and the shock absorber, replace them as soon as possible. If they are not in good condition (cracks, breaks, missing pieces, etc.), there is a major risk of shock absorber damage; this type of defect is not covered by warranty.
The shock absorbers rubber dust protective sleeves are included in the package!
2. Periodically check the tire pressure. Recommended: 1.8 to 2 (1.8 for comfort, 2 for highway conditions).
3. Adjust wheel alignment (especially toe/convergence) after 500–1000 km from suspension installation.
