Bilstein by Mudster - H&R suspension lift kit +5 cm (Dacia Duster)

Complete suspension lift kit (Bilstein by Mudster + H&R) designed to raise the ride height by +5 cm compared to the standard Duster suspension, for Dacia/Renault Duster 4x4 models.

• Compatibility: Dacia/Renault Duster 4x4 2010–2023 with 1.5 Diesel, 1.3 TCe and 2.0 Petrol. 1.6 and 1.2 petrol only if the car has additional front weight (e.g. winch, metal bumper).
• Role: Suspension lift kit with +5 cm lift versus standard suspension; includes shock absorbers and springs as a complete set.
• Material: Not specified.
• Delivery: Not specified.
• Useful for: Vehicles used with added front accessories/weight (where applicable) and owners who want increased ground clearance.
• Off-road usefulness: Increased ground clearance (+5 cm) and improved component protection by keeping the anti-roll bar link mounting point positioned to reduce the risk of contact at full droop.
• On-road usefulness: Lifted suspension setup intended to maintain stable road behavior; wheel alignment is recommended after installation.

Technical notes from the manufacturer:

• Camber angle is corrected (no camber correction kits required).
• The anti-roll bar link mounting point is adjusted so the lower swingarm will not damage the links when the wheel is in its lower position.
• Rubber dust protective sleeves for the shock absorbers are included in the package.

Warranty information (as provided): 24 months with no mileage limit for individuals and 12 months with no mileage limit for legal entities.

Recommendations for use and maintenance:

1. Periodically check the condition of the shock absorber rubber dust protective sleeves (e.g. at oil/filter service intervals). If they show cracks, cuts, gaps between the sleeve and the shock absorber, replace them as soon as possible. If they are not in good condition, there is a major risk of shock absorber damage; this type of defect is not covered by warranty.

2. Periodically check tire pressure (as stated: 1.8–2; 1.8 for comfort, 2 for highway conditions).

3. Perform wheel alignment (especially toe/convergence angles) after 500–1000 km from suspension installation.

Important for warranty: To benefit from warranty, the products must be installed in an authorized workshop. Warranty claims must be accompanied by proof of purchase (invoice, warranty certificate) and proof of installation in an authorized service (installation invoice and work order/estimate).

Shock absorber warranty handling: For shock absorbers covered by a warranty claim, the parts are sent to the manufacturer’s factory for laboratory analysis. This analysis involves opening the shock absorbers; therefore they cannot be returned in the same condition and are scrapped by the factory.

Homologation / documents: Any available homologation is listed in the product’s “Attachments” section. We do not know the specific legislation of each country; beyond the documents already listed there, we can only provide the manufacturer’s certificate of conformity, issued in our own name.